John Deere, Massey Ferguson, Husqvarna, and more


Tractor Parts and Replacement - John Deere, Massey Ferguson, Husqvarna, and more.Showcasing Logan-lathe available to buy here on the internet. Shop logan-lathe in stock today!

Logan Lathe

Searching for Logan Lathe available on sale? Are you looking for John Deere Tractor or other similiar listings? Our site presents a great variety of John Deere Tractor, among other listings such as Massey Ferguson, Baler, Front Loader, Zero Turn, plus lots extra. Shop our great selection, or try a simple search for a precise Logan Lathe with the search bar. Our site has access to hundreds of thousands of items from online sellers, so our site just might have just what you're searching for! Get Logan Lathe today!

9 Inch Logan Lathe Tailstock Model Lb 77 Lb 78 - $275.00

9 Inch Logan Lathe Tailstock Model Lb 77 Lb 78

Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything. I Will Extend To You The Following As My Father Did. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now.


Older Metal Lathe Steady Rest Assembly Possible Logan Tooling - $375.00

Older Metal Lathe Steady Rest Assembly Possible Logan Tooling

Used, Steady Rest Assembly. No Cracks Or Repairs. The Nut Is Missing For The Steady Rest Clamp. Look At The Pictures. No Exceptions No Matter How Close You Think You Live To My Location.


20 Lathe Change Gear Set 20 Pitch 716 Hole South Bend Logan Atlas Elgin Monarch - $295.95

20 Lathe Change Gear Set 20 Pitch 716 Hole South Bend Logan Atlas Elgin Monarch

Timing Gears For A Barber Coleman Hob. Markings First Bunch Is Stamped "104-10-120" Up To The 116's, Then Nothing. Quantity Teeth Od (in). Pressure Angle (pa) 20 Deg. Unsure What They Fit Exactly.


Logan 11 Lathe Steady Rest No Ac 291 - $299.99

Logan 11 Lathe Steady Rest No Ac 291

Logan 11 Lathe Steady Rest No. Ac 291. Used Condition With Dings Dents And Scratches. A Bit Greasy. Overall Solid Condition Nothing Broken Or Repaired. Please See Photos For Details. Thanks For Looking


20 Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond - $550.00

20 Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond

20" Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond. I Dont Know Brand Lathe This Goes To. Make Sure To Check The Measurements Before You Purchase. It Looks To Be In Good Condition. But It Could Probably Use A Little Cleaning Up And Maybe Some New Bearings.see Pictures For Further Detailsfeel Free To Ask Any Questions And Ill Do My Best To Answer Themus Shipping Or Local Pick Up


3 C Collet Closer Drawbar Complete Hardinge Style Logan South Bend Lathe 3c - $275.00

3 C Collet Closer Drawbar Complete Hardinge Style Logan South Bend Lathe 3c

Here Goes Great Drawbar! Not Sure What Machine It's For. The Collet Is Not Included It My Test Collet. I Grabbed A 3c Collet And It Fit And Threaded All The Way Down. I Am Not Sure If Would Fit Diffrent Collets.


3 C Collet Closer Drawbar Complete Logan South Bend Lathe 3c - $250.00

3 C Collet Closer Drawbar Complete Logan South Bend Lathe 3c

The Collet Is Not Included It My Test Collet. I Grabbed A 3c Collet And It Fit And Threaded All The Way Down. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now.


Kalamazoo 6 3 Jaw Both Sets Lathe Chuck 1 12 8 Tpi South Bend Logan Atlas Buck - $500.00

Kalamazoo 6 3 Jaw Both Sets Lathe Chuck 1 12 8 Tpi South Bend Logan Atlas Buck

I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything.


Logan Lathe Compound Saddle Set Up La-1060-1 - $325.00

Logan Lathe Compound Saddle Set Up La-1060-1

Logan Lathe Compound Saddle Set Up .. I Had 2 Logan Lathes So I Dont Know Which Logan Lathe Its Form Probably A 10 Inch Or 11 Inch .


Logan 10 Lathe La-373 Set Of Floor Legs - $350.00

Logan 10 Lathe La-373 Set Of Floor Legs

Original Logan Part From A Logan 200, 10" Lathe. I Will See If I Have The Correct Bolts. If I Do, I Will Include Them With The Part. We Will Do Everything In Our Power To Correct The Situation.


10 Logan Lathe - Headstock Cone Pulley Bull Gear Pinion Spindle Assembly - $325.00

10 Logan Lathe - Headstock Cone Pulley Bull Gear Pinion Spindle Assembly

10" Logan Lathe Headstock Cone Pulley & Pinion Spindle Assembly As Pictured. Bull Gear Has 72 Teeth With 1 14" Bore Diameter. There Are No Chipped Or Broken Teeth On Any Of The Gears. This Came From A Working Model 200 Logan Lathe. Cone Pulley #la-118-2-a. Bull Gear #la-120-2-a. Spindle Gear #la-119-1.


Logan Lathe Legs Pair Retro Cast Iron Machine Legs - $299.00

Logan Lathe Legs Pair Retro Cast Iron Machine Legs

Cast Iron Legs From A Logan Lathe. The Were From A Logan 830, As I Recall. I Have Other Legs Listed Buy Both And Make A Deal. I Was Saving Them To Make A Office Desk Or Table But Realize I Never Get To It.


Tool Post Grinder Bxa Clausing South Bend Logan Atlas Lathe - $289.42

Tool Post Grinder Bxa Clausing South Bend Logan Atlas Lathe

This Compact Grinder Has Many Uses. These Are Just A Few Of The Uses. The Grinder Is Accurate And Simple To Mount. I Hand Build Your Tools. Smooth Running 14 Hp, 10,000 - 30,000 Rpm Variable Speed Motor Provides Plenty Of Power For Grinding Hardened Steel Parts.


Jacobs 91-too Spindl Nose Metal Lathe Collet Chuck 2 14x6 Logan 917 - $495.00

Jacobs 91-too Spindl Nose Metal Lathe Collet Chuck 2 14x6 Logan 917

Might Fit South Bend W Mods.


Metal Lathe 64jaw Chuck W2dia Shank Rare Southbend Logan Sheldon Atlas Usa - $295.00

Metal Lathe 64jaw Chuck W2dia Shank Rare Southbend Logan Sheldon Atlas Usa

Metal Lathe 6"4jaw Chuck W2"dia Shank Southbend Logan Sheldon Atlas. Reverseable Jaws Nice Chuck


15 Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond - $395.00

15 Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond

15" Lathe Steady Rest - South Bend Monarch Logan Clausing Atlas Regal Leblond. I Dont Know Brand Lathe This Goes To. Make Sure To Check The Measurements Before You Purchase. It Looks To Be In Good Condition.see Pictures For Further Detailsfeel Free To Ask Any Questions And Ill Do My Best To Answer Themus Shipping Or Local Pick Up


Logan Metal Lathe Steady Rest 12 Inch Wood No Ac 2189 - $350.00

Logan Metal Lathe Steady Rest 12 Inch Wood No Ac 2189

The Casting Is Not Broken Just A Casting Mark. The Original One Is Ac 2189. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything. I Will Extend To You The Following As My Father Did.


Kitagawa 5 3 Head Chuck Threads Off A Logan Lathe - $500.00

Kitagawa 5 3 Head Chuck Threads Off A Logan Lathe

Kitagawa 5 3 Head Chuck (threads) Off A Logan Lathe. Good Condition See All Photos Any Questions Just Ask This Was Off A Logan Metal Lathe In A Good Size Home Machine Shopthread Are Good Jaws Are Good Has Correct Key


Logan 11 Metal Lathe 6 Position Turret - $350.00

Logan 11 Metal Lathe 6 Position Turret

Logan 11" Metal Lathe 6 Position Turret Assembly. Pickup Only, Too Heavy To Ship For A Reasonable Cost. Price Dropped To $350, Need It Gone This Week.


Logan 10 Lathe La-373 Set Of Lathe Floor Legs Original Condition - $275.00

Logan 10 Lathe La-373 Set Of Lathe Floor Legs Original Condition

Original Logan Part From A Logan 200, 10" Lathe. I Will See If I Have The Correct Bolts. If I Do, I Will Include Them With The Part. We Will Do Everything In Our Power To Correct The Situation.


Logan 200 Lathe Turret Tailstock 6 Way W Carriage Stop Mill Drill Fabrication - $275.00

Logan 200 Lathe Turret Tailstock 6 Way W Carriage Stop Mill Drill Fabrication

Carriage Stop Only Has Two Of The Long Adjustable Screws. Local Pickup In Newark Delaware Only.


Tool Post Grinder Axa Clausing South Bend Logan Atlas Lathe - $289.42

Tool Post Grinder Axa Clausing South Bend Logan Atlas Lathe

This Compact Grinder Has Many Uses. These Are Just A Few Of The Uses. The Grinder Is Accurate And Simple To Mount. I Hand Build Your Tools. Smooth Running 14 Hp, 10,000 - 30,000 Rpm Variable Speed Motor Provides Plenty Of Power For Grinding Hardened Steel Parts.


Logan Lathe Information

8" 3 Jaw Lathe Chuck Self Centering Jaws South Bend Logan Hardinge Clausing

Look At All Pictures For Full Description Of Item Questions Or Concerns Feel Free To Ask Item Comes Exactly As Shown In Pictures

Large Lathe Change Gear Set 10 Pitch 1.125 Hole South Bend Logan Monarch Sheldon

Large Antique Lathe. Dirty But Still. Change Gear Set. 1.125 Hole.

Logan Lead Screw From 10" Logan Lathe. Logan Lead Screw From 10" Logan Lathe. See Image For Condition, Blemishes Are Visible But Only Cosmetic And Dont Affect Function.full Length Is Just Over 3ft, See Pictures For More Detail To Ensure This Fits Your Lathe

Nice Original Logan 10" Model 200 Lathe 43" Bed Lead Screw

Nice - Original Lead Screw For A Logan 10" Model 200 Lathe With 43" Bed. The Keyed Lead Screw Is 46 12" End To End. All As Shown.

Large Lathe Change Gear Set 16 Pitch 3/4" Hole South Bend Logan Monarch Sheldon

Large Antique Lathe. This Set Consists Of The Eighteen Following Gears. Two 28t (one Tooth Chipped), Two 30t, Three 32t, 34t, Two 38t (one Chipped Tooth), Three 40t, 48t, 58t, Three 60t. Change Gear Set.

Logan 10" Lathe La-373 Set Of Lathe Floor Legs Original Condition. Original Logan Part From A Logan 200, 10" Lathe. I Will See If I Have The Correct Bolts. If I Do, I Will Include Them With The Part. We Will Do Everything In Our Power To Correct The Situation.

Machinist Lathe Tools Mill Machinist Logan 8 1/4" Lathe Chuck Drwy

No Exceptions.

Jacobs 50 Chuck 2 1/4” 8tpi 12ea Rubberflex Collets Metal Lathe South Bend Logan

Used Jacobs 50 Collet Chuck For 2 14 8tpi Threaded Spindle Mount. Includes 12ea Rubberflex Collets 0.100 To 1.06 All In Decent Condition.

Logan Lathe 10” Micrometer Stop Carriage Stop. Logan Lathe

Logan 11” Metal Lathe Headstock Cover Casting. Could Use A Good Cleaning Look At Pictures For Full Description Questions Or Concerns Feel Free To Ask And I Will Do My Best To Answer Any Questions Item Comes Exactly As Shown In Pictures

3 C Collet Closer Drawbar Complete Hardinge Style Logan South Bend Lathe 3c. Here Goes Great Drawbar! Not Sure What Machine It's For. The Collet Is Not Included It My Test Collet. I Grabbed A 3c Collet And It Fit And Threaded All The Way Down. I Am Not Sure If Would Fit Diffrent Collets.

6 Way Turret Stop Metal Lathe Logan South Bend Clausing Atlas Carriage Stop

Not 100 Percent Sure For What Machine When I Saw It I Thought Atlas But Then I Saw The "v" And Said I Guess Not. I Saw One Like It On A Logan But I Dont Know For Sure. I Am Not Cleaning Anything Any More.

12" Bison 3 Jaw 2pc Metal Lathe Chuck Flat Back Use On Southbend Logan Clausing

Actual Item Pictured. 2 Jaw Sets Included.

Logan Lathe 10” Cross Slide Leadscew Lead Screw Nut Minimal Backlash. Logan Lathe

Complete 12"  Logan Lathe Leadscrew Assembly In Good Working Condition. Complete 12" Logan Lathe Leadscrew Assembly. In Perfect Working Condition. I Am Parting Out This Lathe. Nothing Was Wrong With It What So Ever ! It Worked Perfectly!

Poland 1754 5" Chuck Reversible Jaws South Bend Lathe Logan Atlas.

M) 11" Logan Lathe Headstock Parts



Logan Lathe Head Stock Casting Model 1935

Part Was Pull Out Of A Logan Lathe Casting Model 1935.

Logan Lathe 14" Vari Drive Cover Guard Guard . Please Look At All Pictures For The Full Description Of The Item Ready To Install There Is No Damage Could Use Cleaning Questions Or Concerns I Encourage You To Ask Thank You And Have A Good Day Item Will Be Shipped Through Ups

11" Logan Lathe Turret Excellent Condition

Resored 11" Logan Lathe Turret.

Graduated 0-120 Lathe Dial Compound Slide South Bend, Logan, Sheldon. Graduated 0-120 Lathe Dial Compound Slide South Bend, Logan, Sheldon. See Pictures For More Information On Sizeexcellent Condition

9 " Inch Logan Lathe Tailstock Model Lb 77 Lb 78. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything. I Will Extend To You The Following As My Father Did. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now.

Dumore #5 The Master 1/2hp 115v Metal Lathe Tool Post Grinder Southbend Logan Et

Dumore #5 The Master 12hp 115v Metal Lathe Tool Post Grinder. Condition Is "used". Someone Has Made A Spindle Arbor Extension For Use With 1-14 Hole Grinder Wheel Like Those Found On Tool And Cutter Grinders And Left Over Wheel Remnants From Surface Grinders.actual Item Pictured.be Sure To View Our Other Items For More Great Tooling Finds.

Logan Lathe 10” Countershaft Counter Shaft Support Bracket

Logan Lathe

Logan Lathe 10” Tailstock Assmebly Quill Handwheel & Clamp

Logan Lathe

Cast Steel Legs Logan South Bend Atlas Lathe. U Cleanpaint.

Nice Original Logan 10" Lathe Pedestal Countershaft Motor Support Post Leg.

Kalamazoo 6" 3 Jaw Both Sets Lathe Chuck 1 1/2 8 Tpi South Bend Logan Atlas Buck. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything.

12" Logan Metal Lathe Level. Both Vial Bubbles Okay.

40 Tooth Pulley Logan 10 11 Lathe Model 200 Gear 40t La 1013 Stud Excellent

I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything.

10" 3 Jaw Lathe Chuck Self Centering Outside Jaws South Bend Logan Cushman

Look At All Pictures For Full Description Of Item Questions Or Concerns Feel Free To Ask Item Comes Exactly As Shown In Pictures Look At Char For Exact Spec

Logan 14" Lathe Headstock Transfer Case Side Panel #6086



Logan 9" Lathe 3/4" Lead Screw For 33" Bed. There Is No Key Slot On The Screw.

Collet Sleeve Logan 3 At Lathe Adaptor Collar Drawbar Part 3at Atlas

Excellent Condition. Collet Not Included. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything.

Logan Lathe Split Half Nut & 3/4" X 43" Lead Screw Saddle Apron Engagement

I Attempt To Include Any Known Flaws.

10" Logan Lathe Headstock End Side Gear Cover Guard With Hinge. 10" Logan Lathe Headstock End Side Gear Cover Guard With Hinge.used.the Pictures Show All That Is Included And The Condition So Please Look Close. Feel Free To Ask Any Questions. Look At Our Other Items On Ebay. We Take Great Pride In Our Customer Service! Please Leave A Positive Feedback.we Will Do The Same! Before Leaving A Negative Or Neutral Feedback, Please Contact Us So We Can Addresswhateverissue You Might Have With Thepurchase. Thank You!

Logan 11" Lathe Six Position Turret Tail Stock.

Powermatic Lathe Dial Screw Nut Carriage Compound Handle Clausing Logan Hardinge. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. The Thread That Would Attach To Your Machine Is 16 Tpi.

10/11" Logan Lathe Apron Handle

Apron Handle From A 10" Logan Lathe Could Be Used In An 11" Also. It Is Used And Will Need Cleaned Up.

Complete 12"  Logan Lathe Headstock Assembly Working

In Perfect Working Condition. I Am Parting Out This Lathe. Nothing Was Wrong With It What So Ever ! It Worked Perfectly!

Kitagawa 5” 3 Head Chuck (threads) Off A Logan Lathe

Kitagawa 5 3 Head Chuck (threads) Off A Logan Lathe. Good Condition See All Photos Any Questions Just Ask This Was Off A Logan Metal Lathe In A Good Size Home Machine Shopthread Are Good Jaws Are Good Has Correct Key

Vintage Tool Post Holder For Atlas Craftsman South Bend Logan Lathe

It Is In Excellent Used Condition. Very Heavy Duty. The Height Is Also 2-12" (excluding The Mounting Base And Fastening Screws).

Apron Assembly For 10" Logan Metal Lathe

I Believe This Is A Model 200 Lathe.

Logan Wards 10" Lathe Head Stock Casting

Logan Montgomery Wards 10" Lathe Head Stocklooks Good, No Cracks, Etc.a Tap Is Broken Off In One Of The Holes On The Front Of The Case.contact Me With Any Questions. Thanks!

Clausing? 0 - 125 Lathe Dial Compound Cross Slide Machine Tool Logan Sheldon

Might Be Clausing. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything.

Logan Lathe Headstock Top Cover 10" X 24" Model 1966 Lathe

You Buy As Is.

Logan Lathe 10” Headstock Spindle Nice😎. Logan Lathe

Tool Post Grinder Bxa Clausing South Bend Logan Atlas Lathe

This Compact Grinder Has Many Uses. These Are Just A Few Of The Uses. The Grinder Is Accurate And Simple To Mount. I Hand Build Your Tools. Smooth Running 14 Hp, 10,000 - 30,000 Rpm Variable Speed Motor Provides Plenty Of Power For Grinding Hardened Steel Parts.

Logan Lathe, Bed, # 24483



Reverse Tumbler Assembly For 10" Logan Metal Lathe . I Believe This Is A Model 200 Lathe. Check All Pics.

Tool Post Grinder Axa Clausing South Bend Logan Atlas Lathe. This Compact Grinder Has Many Uses. These Are Just A Few Of The Uses. The Grinder Is Accurate And Simple To Mount. I Hand Build Your Tools. Smooth Running 14 Hp, 10,000 - 30,000 Rpm Variable Speed Motor Provides Plenty Of Power For Grinding Hardened Steel Parts.

Lathe Sleeve Headstock Logan South Bend Atlas Rockwell Clausing Large # 3 2 Mt. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything.

Logan Model 922 Lathe 11" Leadscrew 49 3/4"

Logan Model 922 Lathe 11" Leadscrew 49 34". Last Picture Shows Small Minor Blemish It Does Not Affect The Way It Is Used There's No Way The Apron Carriage Could Reach That Far Free Shipping To The Lower 48 United States

Large Lathe Change Gear Set 18 Pitch 7/8" Hole South Bend Logan Monarch Sheldon. Large Antique Lathe. This Set Consists Of The Twelve Following Gears. Two 30t, 35t, 40t, 60t, 70t, 80t, 90t, 105t, 110t, 120t,130t. Nice Clean Set With No Broken Teeth. Change Gear Set.

New Atlas Craftsman 9-12 Inch Lathe 3c Collet Adapter South Bend Logan Lathe New

New Hardened And Ground 3c Collet Adapter.

Logan 11" Lathe Headstock Spindle Cone Pulley Pinion Gear 40t Back La-1013-a 

Removed From 11" Logan Model 922 Lathe, But Common On Many 11" Logan Models. Includes Logan Part #'s.

Spindle Pulley For 12" Logan Powermatic Metal Lathe

Pulley Od 7". Possibly Fits Late 12" Logans With Variable Speed (reeves) Drive. See Photos.

8” Diameter Lathe Face Plate 1-1/2" X 8 Tpi South Bend, Logan, Craftsman Atlas. 8 Diameter Lathe Face Plate 1-12" X 8 Tpi South Bend, Logan, Craftsman Atlas. Some Staining And Surface Rust Spots. In Great Shape, Hardly Used. Please See Photos For Details. Thanks For Looking

Logan Metal Lathe Follower Rest 10" 11" Ac 196. Logan Lathe Follower Rest For 10" 11" Lathe Part # Ac 196 In Good Condition.

Logan Model 210 Lathe Bed ,metal Lathe 43'' X 9 1/4'' X 7'',weights 120 Lbs. Solid Bed,no Repairs. One Of The Feet Leg Risers Shows A Chip On One Corner(see Last Photo).

Logan Lathe 10” Belt Guard Cover

Logan Lathe The Guard Was Repaired. The hinge Is Slighty Cocked To One Side. It Still Operated As It Should Though

Lot Of Atlas Craftsman Logan Lathe Steel Quick Change Threading Gears Machinist. For Atlas Craftsman Logan Lathe. Machinist Lathe Quick Change Gears Tools. I Have Lots Of Machinist Tools And Watchmaker Tools. I Am Not Sure What These Gears May Fit. Gears Ready To Use. Keep Watch On My Site.

2 Jaw Buck Chuck South Bend Logan Atlas Craftsman Leblond Clausing Metal Lathe

Used Condition Shows Signs Of Wear And Tear Please Look At All Pictures For Full Description Of The Item Everything Opens And Closes Smoothly Exactly How It Should

Logan Lathe 10” Back Gear

Logan Lathe 10 Head Stock. Could Use Cleaning Used, No Broken Gears Ready To Install Free Shipping Lower 48 United States Usps Flat Rate Box

Vtg Union #123-k 6" 3 Jaw Lathe Chuck Thread 2"-8tpi For Mill South Bend Logan. Jaw Thickness 78". The Chuck Is Missing The Wrench. Square Hole For Wrench 12". This Chuck Is Still In Good, Usable Condition. You Might Just Need To Clean And Re-oil It Before You Use It. This Chuck Is Used.

Nice, Clean, Compound For 10" Logan 820 Lathe

About 0.012" Backlash.

Logan  11" Lathe Belt Guard Cover Top Cover

Logan 11" Lathe Top Belt Guard Removed From An 11" Lathe, I Think This May Fit The 10" As Well. Very Heavy Cast Iron. Condition Is "used"

Lathe 5c Collet Chuck D1-4 (can Switch Back Plate) Logan South Bend Clausing . Have Other Back Plate Mounting Available Free Shipping To The Lower 48 No Drawbar Needed

Clausing Lathe Dial + Screw Carriage Compound Handle Maybe Logan?. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything.

Headstock For Logan Metal Lathe 10" With Drive Belts. Headstock For Logan Metal Lathe 10" With Drive Belts.

Logan Lathe, Model 200, Tailstock Spindle.

1 1/2 10 Tpi Lathe Faceplate South Bend Atlas Logan Sheldon 11 Dia. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything.

Lathe Dial Compound Cross Slide Rockwell South Bend Monarc Logan Clausing . Free Shipping To The Lower 48 United States

Logan Lathe, Bed, # 1



10" Logan Lathe Model #850 Reverse Tumbler Assembly. Reverse Tumbler Assembly For 10" Logan Lathe. Not Pictured Is The Retainer Clip That Is Included With It.

New Atlas Craftsman South Bend Logan Lathe 3c Collet Accessories Set - Collets. New Usa Made 3c Accessories Set.

Lathe Change Gear Set 16 Pitch 7/8 Hole South Bend Logan Atlas Elgin Monarch. Antique Lathe. Change Gear Set. This Set Consists Of The Following Six Gears.

Very Nice Original Logan 10" Lathe Lantern Rocker Tool Post Holder

Very Nice Original Logan 10" Lathe Lantern Rocker Tool Post Holder. Sold As Is Please Look At Photos And Email Me If You Have Any Questions Thank You

Logan 11" Lathe Headstock Bull Gear La - 1003. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything. I Will Extend To You The Following As My Father Did. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now.

Logan 820 Lathe Headstock End Side Gear Cover Guard With Hinge

Logan Lathe Headstock Head Stock Gear Cover Guard With Hinge. For A Logan 820 Lathe Newer Version 1958 And Newerplease Look At Photos Their Two Tap Holes In The Cover

Large Lathe Change Gear Set 10 Pitch 1" Hole South Bend Logan Monarch Sheldon. Large Antique Lathe. Dirty But Still Very Useable. Change Gear Set.

Ammco South Bend Atlas Logan Shaper Machinist Lathe Mill Milling

I Have For Sale An Ammco 7" Shaper. Runs And Operates Need Cleaned A Bit Though. Located In Bloomington Illinois. I Have A Video Of It Running As Well I Can Send.

2 1/4-8 Tpi Lathe Backplate 7 9/16" Fits South Bend Lathe Logan 11" Chuck. Please Look At All Pictures For Full Description Of The Item Comes Exactly As Shown And Pictures Free Shipping To The Lower 48 United States Only

Jacobs 91-too Spindl Nose Metal Lathe Collet Chuck 2 1/4”x6 Logan 917

Might Fit South Bend W Mods.

Logan Lathe 10” Forward Reverse Tumbler

Logan Lathe

Logan Electri-matic 450, Turret Lathe,installation Electrical And Parts Manual. Field Instructions For Filling Hydraulic Booster On Wil-numat 7 Da Collet Closer. It May Not Have The Original Color Cover As It Is A Digitally Enhanced Quality Bound Copy. This Manual Covers Models.

Logan 10" Lathe Headstock Gear Belt Top Cover Door & Hinges.

South Bend Logan Lathe 3c Collet Adapter And Handwheel Drawtube Set New Usa Made

New Usa Made South Bend And Logan Lathe 3c Collet Adapter And Handwheeldrawtube Set. No Collets Included.

Logan Lathe 10” Back Gear Backgear Engagement Shaft Pinion Rack

Logan Lathe

Logan, Powermatic Lathe 14” Dial Screw Nut Carriage.

Logan, Powermatic Lathe Dial Screw Nut Carriage.

Lathe Boring Bar Tool Holder 3/8 1/2 3/4 South Bend Atlas Logan Armstrong



Logan 9" 10" Lathe Mt2 Genuine Jacobs Tailstock Chuck 1/16" - 1/2 Cap. New - Never Used - Original Jacobs No. 26 Drill Chuck With Jacobs Key. Capacity Is 116" - 12". Mounted On An Mt2 Arbor. Excellent Unused Condition. Minimum Capacity 0.500 In. Maximum Capacity.

Logan 6" Three-jaw Lathe Chuck W/ Plain Back Mount - #1063

Model # 1063. Made The Usa By Logan. This Is A 6" Three-jaw Lathe Chuck W Plain Back Mount. Chuck Thickness 2-516". Mount Plain Back.

Logan 10" Lathe 2 Step Countershaft Spindle Shaft Pulley Flat Belt Cone Pulley.

Double Tool Lever Cross Slide For 10" Logan Metal Lathe . Weighs 33lbs.

Metal Lathe 6"4jaw Chuck W/2"dia Shank Rare Southbend Logan Sheldon Atlas Usa. Metal Lathe 6"4jaw Chuck W2"dia Shank Southbend Logan Sheldon Atlas. Reverseable Jaws Nice Chuck

Logan Lathe Mod 2557 . Buck Adjustable 3 Jaw. Collet Closer. Good Running, 220 Volts 3 Phase. Webb Machinery Corp. We Can Load On Your Flat Bed Hwy Truck Nc.

Enco 3 1/2 C Turret Square 4 Tool Holder Post Lathe Clausing South Bend Logan. Works As It Should Not Binding Or Other. Marked Enco 3 12 C, A - 1967 And A Number I Cant Make Out. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now.

Clausing? 0 - 125 Lathe Dial Compound Cross Slide Machine Tool Logan Sheldon. Excellent Condition. Graduated For 0 To 125. Might Be Clausing. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now.

Atlas Craftsman Logan South Bend Lathe 3c Collet Spindle Adapter. Atlas Craftsman Logan South Bend Lathe 3c Collet Spindle Adapter. Look At All Pictures For Full Description Of The Item International Shipping Available First Class Mail **3c Collet Not Included In Sale**

10” Logan Lathe Apron Mechanism . 10 Logan Lathe Apron Mechanism.used.the Pictures Show All That Is Included And The Condition So Please Look Close. Feel Free To Ask Any Questions. Look At Our Other Items On Ebay. We Take Great Pride In Our Customer Service! Please Leave A Positive Feedback.we Will Do The Same! Before Leaving A Negative Or Neutral Feedback, Please Contact Us So We Can Addresswhateverissue You Might Have With Thepurchase. Thank You!

20 Lathe Change Gear Set 20 Pitch 7/16 Hole South Bend Logan Atlas Elgin Monarch

Timing Gears For A Barber Coleman Hob. Markings First Bunch Is Stamped "104-10-120" Up To The 116's, Then Nothing. Quantity Teeth Od (in). Pressure Angle (pa) 20 Deg. Unsure What They Fit Exactly.

Royal Products 5c Collet Closer Colchester Logan South Bend Lathe



Logan 200 Lathe Turret Tailstock 6 Way W/ Carriage Stop Mill Drill Fabrication

Carriage Stop Only Has Two Of The Long Adjustable Screws. Local Pickup In Newark Delaware Only.

Logan Lathe 14" Compound Rest Feed Nut La-1189 Or 6216

Are Your Screw Threads Worn.

Logan Model 920 10" X 30" Tool Room Lathe 120v Single Phase

This Is A Usedlogan Model 920 10" X 30" Tool Room Lathe In Great Condition! Model 920 Tool Room Lathe. 120v Single Phase. They Are Subject To Withdrawal, Change And Prior Sale Without Notice. All Orders Received Are Binding Only When They Have Been Accepted And Acknowledged By Us In Writing.

Palmgren 250 Milling Attachment / Milling Vise For Atlas South Bend Logan Lathe

Palmgren 250 Milling Attachment Milling Vise For Atlas South Bend Logan Lathe. Excellent

Original Logan Lathe Leg Cast Iron Pedestal Countershaft Motor Support Post



Logan 10" Lathe Headstock Spindle

Headstock Spindle Sold As Is Bearings Are Old Spindle Is Good Free Shipping To The Lower 48 United States Ups Ground

Machinist Lathe Mill 10 3/4" By 6" Magna Sine Magnetic Compound Sine Chuck. Machinist Lathe Mill 10 34" By 6" Magna Sine Magnetic Compound Sine Chuck. There Are No Manufacterer Labels On The Chuck But I Am Pretty Confident It Is A Robbins Magna Sine A-10. There Is An Old Tag On It From Aeronutronics Instrument Labroratory, Also A Tag From The University Of Minnesota. If Wanted I Believe The Unit Could Be Disassembled And Be Shipped In Two Usps Flat Rate Boxes For Around $40, Let Me Know If You Would Be Interested In That Option.

Logan Lead Screw For 10" Logan Lathe

Logan Lead Screw For 10" Logan Lathe, Used.

Logan 10" 11" Lathe Apron Feed Shift Lever Eccentric Gear La-554-a La-530 La-554. Logan 10" 11" Lathe Feed Shift Lever Eccentric & Gear. La-554-a Eccentric Assembly. La-554 Eccentric & 0704 Pin. Includes The Following Logan Part #'s Per Parts List Literature These Parts Apply To The Folowing Logan Models 815, 816, 820, 821, 825, 840, 840-2, 845, 915, 915-1, 917, 920, 920-1, 922, 925, 925-1, 927, 935, 935-2, 940, 940-2, 945, 945-2, 955, 957, Possibly More.

14" Logan Lathe Electric Motor With Pulley . Working Condition Ready To Install

10" Logan Lathe Saddle

10" Logan Lathe Saddle.used.the Pictures Show All That Is Included And The Condition So Please Look Close. Feel Free To Ask Any Questions. Look At Our Other Items On Ebay. We Take Great Pride In Our Customer Service! Please Leave A Positive Feedback.we Will Do The Same! Before Leaving A Negative Or Neutral Feedback, Please Contact Us So We Can Addresswhateverissue You Might Have With Thepurchase. Thank You!

Lead Screw And Bushing Brackets For 10" Logan Metal Lathe . I Believe This Is A Model 200 Lathe. Used Condition, Shows Signs Of Use. The Bushing Brackets Fit Good On The Lead Screw, No Excessive Play.

Logan Lathe 10” Threading Dial Chasing Dial. Logan Lathe

Jacobs 59b Lathe 1 1/2 X 8 Headstock Chuck 3/4” South Bend Atlas Logan W/arbor

You'll Get Exactly What You See In The Photos.

Atlas Craftsman Logan South Bend Lathe Er 40 Collet Chuck Only + Wrench 1 1/2-8. Er 40 Collets Chuck With Wrench And 1 12-8 Mounting Plate With Fasteners. No Collets Included.

Logan Metal Lathe Steady Rest 12 Inch Wood No Ac 2189. The Casting Is Not Broken Just A Casting Mark. The Original One Is Ac 2189. Ding Or Mark On Everything. If I Can Not Then I Must Take Pictures Of Everything. I Will Extend To You The Following As My Father Did.

Logan Lathe 10” Steady Rest. Logan Lathe

Logan Mo 922 11" Metal Lathe Motor Mount Assembly

Good Condition But I Do Note The Owner Drilled 2 Holes For Motor Mount Holes See Pictures. I Test Them, & Or Inspect Them, When I Can & Note What I Notice In Testing & Inspecting. I Have No Idea If They Will Last 10 Minutes Or 50 Years, No Warranties Are Implied & No Warranties Are Included.

2mt Morse Taper Collets 5 Pc Hardinge/royal Atlas Craftsman Lathe Mill Logan

#2mt Morse Taper Collets Made By Hardinge And Royal. Very Good Condition. Sizes Are 18, 14, 516, 38, 716.

New Atlas Craftsman Logan Lathe 4 Inch 3 Hole Backing Plate 1 1/2-8 Mount New.

Antique J.g. Blount Wood Lathe Banjo Tool Rest South Bend Logan Clausing?⬇️. Antique J.g. Blount Wood Lathe Banjo Tool Rest Maybe South Bend Logan Clashing . Im Not Positive What This Is Originally Made For. It Did Come Off A J.g. Blount. Center To Center Of v Is 5 78

10" Logan Model 200 Metal Lathe - Side End Gear Cover. Side End Gear Cover For A 10" Logan Lath Model 200.

Logan Metal 10” Lathe 43" Bed Good Shape Will Ship

Logan Metal 10 Lathe 43" Bed Good Shape Will Ship.

Logan Lathe 11" Headstock Spindle Gear 46 Tooth La-1018. Free Shipping To The Lower 48 United States Only

Logan, Atlas, South Bend Lathe 3c Collet Spindle Nose Protector Sleeve Adaptor

In Excellent Working Condition.

Atlas Craftsman 1-1/2 X8 Tpi Lathe Face Plate 8 1/2” South Bend Logan 9-365. Atlas Craftsman 1-12 X8 Tpi Lathe Face Plate 8 12 South Bend Logan 9-365. Used Condition With Dings Dents And Scratches. Please See Photos For Details. Thanks For Looking